Montgomery County, NY Water Quality

Mohawk Valley · County seat: Fonda. Find your water provider, locate your Consumer Confidence Report, and understand local water in Montgomery County.

About Montgomery County water

How water works in Montgomery County

Montgomery County (county seat: Fonda) mixes municipal water systems in its cities, villages, and denser towns with private wells that remain common in its more rural areas. Which setup you have — and therefore how you check your water — depends on your specific address, not just the county.

Here, systems draw from upland reservoirs (such as Hinckley), the Mohawk River corridor, and groundwater.

Your provider

Water system providers in Montgomery County

Montgomery County is served by a mix of municipal water systems, small water districts, and private wells rather than a single dominant utility. To confirm the public water system serving a specific address, check a recent water bill or use the NYSDOH and EPA lookup tools below.

Water systems (federal records)

Community water systems serving Montgomery County

Federal EPA drinking-water records list 18 active community water systems serving Montgomery County, together reported to serve about 34,518 people. The largest are shown below (by population served). Click a PWS ID for that system's federal report.

PWS IDSystemPrimary sourcePopulation servedConnectionsReport
NY2800136Amsterdam (C)Surface water20,7006,000EPA report
NY2811730Amsterdam (T)Purchased surface water3,000347EPA report
NY2800137Canajoharie (V) Water WorksSurface water2,300850EPA report
NY2800139Fort Plain (V) Water WorksSurface water2,250800EPA report
NY2800143St. Johnsville Village Water WorksSurface water1,700641EPA report
NY2800138Fonda (V) Water WorksSurface water1,080481EPA report
NY2800142Palatine Bridge (V) Water WorksGroundwater (wells)900342EPA report
NY2800140Fultonville Village PwsGroundwater (wells)740254EPA report
NY2800141Nelliston (V) Water WorksPurchased surface water535204EPA report
NY2830029Florida (T) Water DistrictPurchased surface water43246EPA report
NY2810477Capstone Center For Rehab And NursingGroundwater (wells)3304EPA report
NY2801597Country EstatesGroundwater (wells)15078EPA report
NY2801600Pine Meadow MhcGroundwater (wells)10033EPA report
NY2801592Pattersonville Mobile Home #1Groundwater under influence of surface water8127EPA report
NY2801596Shady Lane Park, Inc.Groundwater (wells)8048EPA report

…and 3 more, mostly smaller community systems. Full federal records for every system are on EPA ECHO.

Source: EPA Safe Drinking Water Information System (SDWIS), pulled July 2026. Population and connection figures are SDWIS-reported estimates. This lists community systems only — it excludes private wells and transient systems. Confirm the exact system for an address on a water bill.

Compliance

Violations and notices in Montgomery County

Of the 18 community water systems serving Montgomery County, federal EPA records show 7 with at least one health-based violation on record over the years. A violation can range from a monitoring/reporting lapse to an exceedance that has since been resolved — open a system's federal report (linked in the table above) or its current Consumer Confidence Report for the specifics and current status.

Water characteristics

What Montgomery County water is typically like

Mohawk Valley water is generally moderate in hardness; reservoir supplies are softer while groundwater can be harder and higher in iron.

Regional patterns are a general guide only — hardness, iron, and other traits vary by specific system and well. Your CCR (or a well test) is the authoritative source for your address.

PFAS monitoring (EPA UCMR5)

PFAS testing in Montgomery County

2 water systems in Montgomery County participated in the EPA's fifth Unregulated Contaminant Monitoring Rule (UCMR5), which tested for 29 PFAS compounds and lithium in 2023–2025. In this round, no PFAS were detected above the reporting level in the Montgomery County results collected so far. See our New York drinking water standards guide for how PFAS is regulated here.

Read the fine print

What these records don't show

The system and compliance records above come from federal data. Some things people ask about are not captured here and should be confirmed directly:

  • Contaminant levels at your tap. Actual values (lead, PFAS, nitrate, disinfection byproducts, etc.) come only from your system's Consumer Confidence Report or your own well test — we do not publish or estimate them.
  • Water hardness. Not in the federal system records. Ask your utility for the CCR hardness value or use a home hardness test. See our hard-water guide.
  • Taste, odor, color, and staining. These aesthetic issues are not standardized here; your CCR's secondary-contaminant notes and your own observations are the best guide.
  • Year-over-year change. We don't track how a system's results changed from last year — compare this year's CCR to last year's using the report links.

Detailed local guides

Town & city water guides in Montgomery County

Deeper guides naming the specific water provider and local context for each place:

Amsterdam

Find your report

How to find your water provider and report

  1. Check a recent water bill for your water system or district name.
  2. Look up that system and its most recent Consumer Confidence Report (CCR) using the official tools below.
  3. On a private well? A CCR won't apply — see our private well testing guide.

Confirm it's your water

Make sure a report is actually yours

  1. Find the provider name and PWS ID printed on your water bill — a town name or ZIP alone is not enough to identify the system.
  2. Match that PWS ID to the systems table above (or search it on EPA ECHO).
  3. Open that system's current CCR for the official results and any notices.
  4. For a point-of-use concern (especially lead), use a certified laboratory test for your specific tap — the system-wide report can meet standards while an individual older home does not.

Lead & older homes

Lead and service lines in Montgomery County

Lead is almost never in the water leaving a treatment plant — it typically enters from a lead service line or older home plumbing. A system-wide CCR can meet the lead action level while an individual older home shows a higher result at the tap. New York requires public water systems to inventory their lead service lines, so ask your utility for its inventory, and confirm your own tap with a certified laboratory test. See our lead & copper guide and utility report vs. home tap test.

Communities

Cities, towns, villages, and hamlets in Montgomery County

Local guidance in Montgomery County is most relevant to these cities, towns, villages, and hamlets (this is a starter list for an upstate county — more communities are added over time):

  • Fonda
  • Amsterdam
  • Canajoharie
  • Fort Plain
  • St. Johnsville
  • Fultonville

Representative ZIP codes

A sample of ZIP codes in Montgomery County (not a complete list; one ZIP can span multiple systems):

  • 12068
  • 12010
  • 13317
  • 13339

Improve your water

Common Montgomery County home water steps

Test & understand

Start with your CCR (or a well test), then read how to read a water quality report.

Treat the right problem

A clean report often means no equipment is needed. For a confirmed concern, match it to options with our treatment decision matrix — treatment guidance is separate from the regulatory info above and is not a recommendation to buy anything.

Schools & facilities

New York public schools must test for lead — see the NY school lead testing overview.

Get local help

Have a specific question about your Montgomery County water? Contact us and we'll point you to the right next step.

Authoritative resources

Official & academic water resources for Montgomery County

For primary data and research beyond this guide, these New York agencies and universities are the authoritative sources:

FAQ

Frequently asked questions

Who provides drinking water in Montgomery County?

Montgomery County is served by a mix of municipal systems, water districts, and private wells. Federal records list 18 active community water systems in the county. Check a recent water bill or the lookup tools to confirm the exact system serving your address.

How do I find my water quality report in Montgomery County?

Every community water system must publish an annual Consumer Confidence Report (CCR). Identify your provider first, then request its current CCR from the provider or through NYSDOH. Private wells are not covered by a CCR and must be tested independently.

Is Montgomery County water hard or soft?

Mohawk Valley water is generally moderate in hardness; reservoir supplies are softer while groundwater can be harder and higher in iron.

Are there water-quality violations in Montgomery County?

Federal EPA records show 7 of the county's 18 community water systems with a health-based violation on record over the years; open a system's federal report or current CCR for status.

Does this page publish local test results?

No. We publish the systems, sources, and compliance records that come from federal data, but not address-level contaminant values — those come only from each provider's official CCR and the NYS Department of Health.

NY Water Quality Guide is an independent educational resource and is not affiliated with any government agency or utility. System and compliance data on this page come from the EPA Safe Drinking Water Information System (federal records) and describe general Montgomery County water; the page does not publish address-level contaminant test results. Confirm current conditions in your provider's latest Consumer Confidence Report or with the NYS Department of Health.

Last reviewed: July 2026