Erie County, NY Water Quality
Western New York · County seat: Buffalo. Find your water provider, locate your Consumer Confidence Report, and understand local water in Erie County.
About Erie County water
How water works in Erie County
Erie County (county seat: Buffalo) mixes municipal water systems in its cities, villages, and denser towns with private wells that remain common in its more rural areas. Which setup you have — and therefore how you check your water — depends on your specific address, not just the county.
Here, larger systems draw primarily from Lake Erie and Lake Ontario, while groundwater serves many smaller communities.
Your provider
Water system providers in Erie County
In Erie County, water is supplied by Buffalo Water and the Erie County Water Authority, both drawing from Lake Erie. One address can still fall within more than one system, so confirm the provider on a recent bill or with the official lookup tools below.
Water systems (federal records)
Community water systems serving Erie County
Federal EPA drinking-water records list 44 active community water systems serving Erie County, together reported to serve about 945,839 people. The largest are shown below (by population served). Click a PWS ID for that system's federal report.
| PWS ID | System | Primary source | Population served | Connections | Report |
|---|---|---|---|---|---|
| NY1400443 | ECWA Direct | Surface water | 313,380 | 115,486 | Official CCR ↗ |
| NY1400422 | Buffalo Water Authority | Surface water | 276,000 | 80,000 | Official CCR ↗ |
| NY1400399 | ECWA Amherst | Purchased surface water | 92,697 | 29,335 | EPA report |
| NY1404556 | Tonawanda, Town Water Dept. | Surface water | 72,571 | 23,688 | EPA report |
| NY1400421 | ECWA Lancaster | Purchased surface water | 29,018 | 10,595 | EPA report |
| NY1421762 | ECWA Orchard Park | Purchased surface water | 24,582 | 10,171 | EPA report |
| NY1404543 | ECWA West Seneca | Purchased surface water | 23,557 | 9,441 | EPA report |
| NY1400451 | Grand Island Town Water Dept. | Surface water | 19,500 | 6,200 | EPA report |
| NY1410142 | Kenmore Village | Purchased surface water | 15,423 | 6,707 | EPA report |
| NY1400445 | ECWA Evans | Purchased surface water | 12,338 | 2,094 | EPA report |
| NY1420549 | Elma Water District No. 1 | Purchased surface water | 10,287 | 3,889 | EPA report |
| NY1400515 | ECWA Hamburg (V) | Purchased surface water | 9,744 | 3,204 | EPA report |
| NY1421897 | ECWA Boston | Purchased surface water | 7,250 | 3,058 | EPA report |
| NY1400433 | East Aurora Village | Purchased surface water | 6,610 | 2,220 | EPA report |
| NY1422651 | ECWA Newstead | Purchased surface water | 5,801 | 70 | EPA report |
…and 29 more, mostly smaller community systems. Full federal records for every system are on EPA ECHO.
Source: EPA Safe Drinking Water Information System (SDWIS), pulled July 2026. Population and connection figures are SDWIS-reported estimates. This lists community systems only — it excludes private wells and transient systems. Confirm the exact system for an address on a water bill.
Compliance
Violations and notices in Erie County
Of the 44 community water systems serving Erie County, federal EPA records show 17 with at least one health-based violation on record over the years. A violation can range from a monitoring/reporting lapse to an exceedance that has since been resolved — open a system's federal report (linked in the table above) or its current Consumer Confidence Report for the specifics and current status.
Water characteristics
What Erie County water is typically like
Western New York's Great Lakes supplies (Erie, Ontario) are moderately hard and treated at large filtration plants; rural groundwater can be harder and higher in iron, sulfur, or, locally, methane.
Regional patterns are a general guide only — hardness, iron, and other traits vary by specific system and well. Your CCR (or a well test) is the authoritative source for your address.
Reported contaminant levels
Erie County Water Authority (ECWA Direct) — reported levels (2025 report)
Selected regulated contaminants from this system's official Consumer Confidence Report. "Below/At/Above" compares the reported value to its limit; it does not replace the utility's formal compliance determination.
| Contaminant | Reported level | Limit | vs. limit | Sample yr |
|---|---|---|---|---|
| Lead (90th percentile) 90th %ile of 71 sites; AL exceeded in 0 homes. NOTE: a report footnote mislabels 19.3 (copper's value) as lead — 6.47 is correct per the data row + 'zero homes' statement | 6.47 ppb | 15 ppb (Action level) | Below | 2025 report |
| Copper (90th percentile) 90th %ile 19.3 µg/L = 0.0193 mg/L; 0 of 71 above AL | 0.0193 ppm | 1.3 ppm (Action level) | Below | 2025 report |
| Nitrate average 0.11 mg/L | 0.11 ppm | 10 ppm (MCL) | Below | 2025 report |
| Turbidity highest single entry-point measurement 0.170 NTU (6/9/2025) | 0.17 NTU | — | — | 2025 report |
| Chlorine (residual) avg; range 0.82-1.80 | 1.62 ppm | 4.0 ppm (MRDL) | Below | 2025 report |
| PFOA avg 2.62 ng/L | 2.62 ppt | 10 ppt (MCL (NY)) | Below | 2025 report |
| PFOS avg 2.61 ng/L; range <2.0-2.61 | 2.61 ppt | 10 ppt (MCL (NY)) | Below | 2025 report |
Values transcribed from the official CCR (source ↗) as a first-pass reading — always confirm against the full report, which lists every monitored contaminant, ranges, and footnotes. Lead/copper are 90th-percentile action-level results. This is a partial panel; absence of a contaminant here does not mean it wasn't tested.
Reported contaminant levels
Buffalo Water Authority — reported levels (2025 report)
Selected regulated contaminants from this system's official Consumer Confidence Report. "Below/At/Above" compares the reported value to its limit; it does not replace the utility's formal compliance determination.
| Contaminant | Reported level | Limit | vs. limit | Sample yr |
|---|---|---|---|---|
| Lead (90th percentile) reported range ND-7.13 ppb; below 15 AL (no exceedance) | 7.13 ppb | 15 ppb (Action level) | Below | 2025 |
| Copper (90th percentile) range ND-3.8 ppb = 0.0038 mg/L; below 1.3 AL | 0.0038 ppm | 1.3 ppm (Action level) | Below | 2025 |
| Total Trihalomethanes (TTHM) range 15-67 ppb; below 80 — VERIFY LRAA in source | 67 ppb | 80 ppb (MCL) | Below | 2025 |
| Turbidity range 0.05-0.14 NTU; limit <=1.0 | 0.14 NTU | — | — | 2025 |
| PFOS range 1.34-3.56 ppt; below 10 | 3.56 ppt | 10 ppt (MCL (NY)) | Below | 2025 |
Values transcribed from the official CCR (source ↗) as a first-pass reading — always confirm against the full report, which lists every monitored contaminant, ranges, and footnotes. Lead/copper are 90th-percentile action-level results. This is a partial panel; absence of a contaminant here does not mean it wasn't tested.
PFAS monitoring (EPA UCMR5)
PFAS monitoring results in Erie County
Under the EPA's fifth Unregulated Contaminant Monitoring Rule (UCMR5), 10 water systems in Erie County tested for 29 PFAS compounds and lithium in 2023–2025. Of those, 2 had at least one PFAS detection, and none had a PFOA or PFOS detection, though some detected other PFAS at low levels.
How to read this: These are occurrence-monitoring results, not compliance determinations. New York's enforceable limit (MMCL) is 10 ppt each for PFOA and PFOS; a monitoring result above that is a signal to look closer, not automatically a violation — and a system may have added treatment or changed sources since it was sampled. Values are the highest detected at any sampling point, in parts per trillion (ppt). Always check the system's current Consumer Confidence Report for its latest status. Source: EPA UCMR5 (data collected 2023–2025). See PFAS explained and NY drinking water standards.
Read the fine print
What these records don't show
The system and compliance records above come from federal data. Some things people ask about are not captured here and should be confirmed directly:
- Contaminant levels at your tap. Actual values (lead, PFAS, nitrate, disinfection byproducts, etc.) come only from your system's Consumer Confidence Report or your own well test — we do not publish or estimate them.
- Water hardness. Not in the federal system records. Ask your utility for the CCR hardness value or use a home hardness test. See our hard-water guide.
- Taste, odor, color, and staining. These aesthetic issues are not standardized here; your CCR's secondary-contaminant notes and your own observations are the best guide.
- Year-over-year change. We don't track how a system's results changed from last year — compare this year's CCR to last year's using the report links.
Detailed local guides
Town & city water guides in Erie County
Deeper guides naming the specific water provider and local context for each place:
Buffalo · Amherst · Cheektowaga · Tonawanda · West Seneca · Lackawanna · Hamburg · Orchard Park · Lancaster · Depew · East Aurora · Williamsville · Kenmore · Grand Island
Find your report
How to find your water provider and report
- Check a recent water bill for your water system or district name.
- Look up that system and its most recent Consumer Confidence Report (CCR) using the official tools below.
- On a private well? A CCR won't apply — see our private well testing guide.
Confirm it's your water
Make sure a report is actually yours
- Find the provider name and PWS ID printed on your water bill — a town name or ZIP alone is not enough to identify the system.
- Match that PWS ID to the systems table above (or search it on EPA ECHO).
- Open that system's current CCR for the official results and any notices.
- For a point-of-use concern (especially lead), use a certified laboratory test for your specific tap — the system-wide report can meet standards while an individual older home does not.
Lead & older homes
Lead and service lines in Erie County
Lead is almost never in the water leaving a treatment plant — it typically enters from a lead service line or older home plumbing. A system-wide CCR can meet the lead action level while an individual older home shows a higher result at the tap. New York requires public water systems to inventory their lead service lines, so ask your utility for its inventory, and confirm your own tap with a certified laboratory test. See our lead & copper guide and utility report vs. home tap test.
Communities
Cities, towns, villages, and hamlets in Erie County
Local guidance in Erie County is most relevant to these cities, towns, villages, and hamlets (this is a starter list for an upstate county — more communities are added over time):
- Buffalo
- Amherst
- Cheektowaga
- Tonawanda
- West Seneca
- Lackawanna
- Hamburg
- Orchard Park
- Lancaster
- Depew
- East Aurora
- Williamsville
- Kenmore
- Grand Island
Representative ZIP codes
A sample of ZIP codes in Erie County (not a complete list; one ZIP can span multiple systems):
- 14201
- 14202
- 14203
- 14204
- 14206
- 14207
- 14208
- 14209
- 14210
- 14211
- 14212
- 14213
- 14214
- 14215
- 14216
- 14217
- 14218
- 14219
- 14220
- 14221
- 14225
- 14226
- 14227
- 14228
- 14051
- 14075
- 14086
- 14127
- 14150
Improve your water
Common Erie County home water steps
Test & understand
Start with your CCR (or a well test), then read how to read a water quality report.
Treat the right problem
A clean report often means no equipment is needed. For a confirmed concern, match it to options with our treatment decision matrix — treatment guidance is separate from the regulatory info above and is not a recommendation to buy anything.
Schools & facilities
New York public schools must test for lead — see the NY school lead testing overview.
Get local help
Have a specific question about your Erie County water? Contact us and we'll point you to the right next step.
Authoritative resources
Official & academic water resources for Erie County
For primary data and research beyond this guide, these New York agencies and universities are the authoritative sources:
FAQ
Frequently asked questions
Who provides drinking water in Erie County?
Buffalo Water and the Erie County Water Authority, both drawing from Lake Erie. Federal records list 44 active community water systems in the county. Check a recent water bill or the lookup tools to confirm the exact system serving your address.
How do I find my water quality report in Erie County?
Every community water system must publish an annual Consumer Confidence Report (CCR). Identify your provider first, then request its current CCR from the provider or through NYSDOH. Private wells are not covered by a CCR and must be tested independently.
Is Erie County water hard or soft?
Western New York's Great Lakes supplies (Erie, Ontario) are moderately hard and treated at large filtration plants; rural groundwater can be harder and higher in iron, sulfur, or, locally, methane.
Are there water-quality violations in Erie County?
Federal EPA records show 17 of the county's 44 community water systems with a health-based violation on record over the years; open a system's federal report or current CCR for status.
Does this page publish local test results?
No. We publish the systems, sources, and compliance records that come from federal data, but not address-level contaminant values — those come only from each provider's official CCR and the NYS Department of Health.
NY Water Quality Guide is an independent educational resource and is not affiliated with any government agency or utility. System and compliance data on this page come from the EPA Safe Drinking Water Information System (federal records) and describe general Erie County water; the page does not publish address-level contaminant test results. Confirm current conditions in your provider's latest Consumer Confidence Report or with the NYS Department of Health.
Last reviewed: July 2026